Previous module | Next module Module #48, TG: 3, TC: 2.2, 11 probes, 10 Entrez genes, 6 conditions

Under-expression is coded with green, over-expression with red color.

HELP

This is one of three sections showing Gene Ontology enrichment of the current module: in this case for biological processes.

The graph shows the hierarchy of the GO categories, their enrichment for the current module is color coded, and the blue number beside the category is the minus log ten p-value of the enrichment. (Calculated using the standard hypergeometric test.) The color of the arrows code «is a» (cyan) and «part of» relationships.

The tree was built the following way. First all GO terms with more significant enrichment p-value than 0.05 were collected. Then all paths from these terms to the root node of the GO tree were included too. If a GO term is included more than once in the tree, then the green numbers show 1) the id of the node, this makes it easier to find other appereances of the term, and 2) the number of appearences.

Note that the same GO category might show up on the graph many times. This is because the GO was «straightened» for this graph, i.e. if there are more paths from a GO term to the root node of the tree, all of them are included. The green numbers

Move the mouse cursor over the terms to get their definition. Clicking on them takes you to the corresponding Gene Ontology web page.

If you cannot see a graph here at all, that means that there were no significantly enriched GO categories, at the 0.05 level.

— Click on the Help button again to close this help window.

HELP

This is one of three sections showing Gene Ontology enrichment of the current module: in this case for cellular components.

The graph shows the hierarchy of the GO categories, their enrichment for the current module is color coded, and the blue number beside the category is the minus log ten p-value of the enrichment. (Calculated using the standard hypergeometric test.) The color of the arrows code «is a» (cyan) and «part of» relationships.

The tree was built the following way. First all GO terms with more significant enrichment p-value than 0.05 were collected. Then all paths from these terms to the root node of the GO tree were included too. If a GO term is included more than once in the tree, then the green numbers show 1) the id of the node, this makes it easier to find other appereances of the term, and 2) the number of appearences.

Note that the same GO category might show up on the graph many times. This is because the GO was «straightened» for this graph, i.e. if there are more paths from a GO term to the root node of the tree, all of them are included. The green numbers

Move the mouse cursor over the terms to get their definition. Clicking on them takes you to the corresponding Gene Ontology web page.

If you cannot see a graph here at all, that means that there were no significantly enriched GO categories, at the 0.05 level.

— Click on the Help button again to close this help window.

HELP

This is one of three sections showing Gene Ontology enrichment of the current module: in this case for molecular function.

The graph shows the hierarchy of the GO categories, their enrichment for the current module is color coded, and the blue number beside the category is the minus log ten p-value of the enrichment. (Calculated using the standard hypergeometric test.) The color of the arrows code «is a» (cyan) and «part of» relationships.

The tree was built the following way. First all GO terms with more significant enrichment p-value than 0.05 were collected. Then all paths from these terms to the root node of the GO tree were included too. If a GO term is included more than once in the tree, then the green numbers show 1) the id of the node, this makes it easier to find other appereances of the term, and 2) the number of appearences.

Note that the same GO category might show up on the graph many times. This is because the GO was «straightened» for this graph, i.e. if there are more paths from a GO term to the root node of the tree, all of them are included. The green numbers

Move the mouse cursor over the terms to get their definition. Clicking on them takes you to the corresponding Gene Ontology web page.

If you cannot see a graph here at all, that means that there were no significantly enriched GO categories, at the 0.05 level.

— Click on the Help button again to close this help window.

HELP

List of all enriched GO categories (biological processes), at the 0.05 p-value level.

The columns:

• ExpCount is the expected count of genes in the module annotated with the given GO term, just by chance.
• Count is the number of genes in the module annotated with the given GO term.
• Size is the total number of genes (in our universe) annotated with the GO term.

Clicking on Count shows the genes that drive the enrichment. You can also click on the individual numbers in the Count column, to show the driving genes for that individual GO category.

Clicking on the GO identifiers takes you to the Gene Ontology web pages.

— Click on the Help button again to close this help window.

HELP

List of all enriched GO categories (cellular components), at the 0.05 p-value level.

The columns:

• ExpCount is the expected count of genes in the module annotated with the given GO term, just by chance.
• Count is the number of genes in the module annotated with the given GO term.
• Size is the total number of genes (in our universe) annotated with the GO term.

Clicking on Count shows the genes that drive the enrichment. You can also click on the individual numbers in the Count column, to show the driving genes for that individual GO category.

Clicking on the GO identifiers takes you to the Gene Ontology web pages.

— Click on the Help button again to close this help window.

HELP

List of all enriched GO categories (molecular function), at the 0.05 p-value level.

The columns:

• ExpCount is the expected count of genes in the module annotated with the given GO term, just by chance.
• Count is the number of genes in the module annotated with the given GO term.
• Size is the total number of genes (in our universe) annotated with the GO term.

Clicking on Count shows the genes that drive the enrichment. You can also click on the individual numbers in the Count column, to show the driving genes for that individual GO category.

Clicking on the GO identifiers takes you to the Gene Ontology web pages.

— Click on the Help button again to close this help window.

HELP

List of all enriched KEGG pathways, at the 0.05 p-value level.

The columns:

• ExpCount is the expected count of genes in the module annotated with the given KEGG pathway, just by chance.
• Count is the number of genes in the module annotated with the given KEGG pathway.
• Size is the total number of genes (in our universe) annotated with the KEGG pathway.

Clicking on Count shows the genes that drive the enrichment. You can also click on the individual numbers in the Count column, to show the driving genes for that individual KEGG pathway.

Clicking on the KEGG identifiers takes you to the KEGG web site.

— Click on the Help button again to close this help window.

HELP

List of all enriched miRNA families, at the 0.05 p-value level.

The columns:

• ExpCount is the expected count of genes in the module regulated by the given miRNA family, just by chance.
• Count is the number of genes in the module regulated by the given miRNA family.
• Size is the total number of genes (in our universe) regulated with the given miRNA family.

Clicking on Count shows the genes that drive the enrichment. You can also click on the individual numbers in the Count column, to show the driving genes for that individual miRNA family.

The miRNA regulation data was taken from the TargetScan database. (Only the conserved sites were used for the current analysis.) Clicking on the miRNA names takes you to the TargetScan web site.

— Click on the Help button again to close this help window.

HELP

List of all enriched Chromosomes, at the 0.05 p-value level.

The columns:

• ExpCount is the expected number of genes in the module on the given chromosome, just by chance.
• Count is the number of genes in the module on the given chromosome.
• Size is the total number of genes (in our universe) on the given chromosome.

Clicking on Count shows the genes that drive the enrichment. You can also click on the individual numbers in the Count column, to show the driving genes for that individual chromosome.

— Click on the Help button again to close this help window.

HELP

A list of all genes in the current module, in alphabetical order. The size of the text corresponds to the gene scores.

Text color indicates correlation and anti-correlation: genes of the same color are correlated, both move up or down in the module samples (listed below). Genes of different color are anti-correlated, they have opposite behavior in the module samples.

Note, that text color of the individual genes should be interpreted together with the coloring of the samples below. For red samples, red genes have a higher expression (compared to the average gene expression level), green genes have a lower expression.

Green samples have opposite behavior, in these red genes have a lower expression, green genes have a higher expression.

Note that some gene symbols may show up more than once, if many probes match the same Entrez gene.

Genes with no Entrez mapping are given separately, with their Affymetrics probe ID.

— Click on the Help button again to close this help window.

HELP

Conditions in the module, given in the same order as on the expression plot above. Red color means over-expression, green under-expression in the given condition.

The barplot below shows the condition (sample) scores. A separate bar is shown for each sample, its height is the corresponding score of the sample in the module. The red and green numbers on the bars are the sample scores expressed in percents, i.e. 100% is 1.0.

The height of each bar corresponds to the weighted mean expression of the module genes. The weights are the gene scores of the module and they are positive for the genes listed in red above and they are negative for the genes that are listed in green.

Bars going up correspond to samples listed in red (the ones that are different enough to included in the module). In these samples the red module genes are highly expressed, and the green module genes are lowly expressed. The behavior of the genes is the opposite for bars going down.

The red and green lines show the module thresholds, samples above the red line and below the green line are included in the module.

The different species and tissues that were part of the study, are separated by dashed vertical lines.

— Click on the Help button again to close this help window.